Control Voltage to Midi Convertor project


The UB MicroController, (a 68hc11 running

at 8 mhz) used to output MIDI data from

a control voltage input. UB students have constructed the PC board and designed the software to run the system.

We need people to help package the prototype in order to bring it to market. The system is

6.5x4 by 2 inches tall. Uses a 9 VDC battery and has 1 5 pin DIN connector with a chasis mount.

The box has be able to be opened for assembly and batt replacement. A .25 inch diameter hole is needed for a clear window.

Materal for construction may be conductive, provided that as long as there is support for the circuit board. The box should be generally light tight except for the window.